ggplot2 colors : How to change colors automatically and manually?


The goal of this article is to describe how to change the color of a graph generated using R software and ggplot2 package. A color can be specified either by name (e.g.: “red”) or by hexadecimal code (e.g. : “#FF1234”). The different color systems available in R are described at this link : colors in R.

In this R tutorial, you will learn how to :

  • change colors by groups (automatically and manually)
  • use RColorBrewer and Wes Anderson color palettes
  • use gradient colors

ggplot2 color, graph, R software


Prepare the data

ToothGrowth and mtcars data sets are used in the examples below.

# Convert dose and cyl columns from numeric to factor variables
ToothGrowth$dose <- as.factor(ToothGrowth$dose)
mtcars$cyl <- as.factor(mtcars$cyl)
head(ToothGrowth)
##    len supp dose
## 1  4.2   VC  0.5
## 2 11.5   VC  0.5
## 3  7.3   VC  0.5
## 4  5.8   VC  0.5
## 5  6.4   VC  0.5
## 6 10.0   VC  0.5
head(mtcars)
##                    mpg cyl disp  hp drat    wt  qsec vs am gear carb
## Mazda RX4         21.0   6  160 110 3.90 2.620 16.46  0  1    4    4
## Mazda RX4 Wag     21.0   6  160 110 3.90 2.875 17.02  0  1    4    4
## Datsun 710        22.8   4  108  93 3.85 2.320 18.61  1  1    4    1
## Hornet 4 Drive    21.4   6  258 110 3.08 3.215 19.44  1  0    3    1
## Hornet Sportabout 18.7   8  360 175 3.15 3.440 17.02  0  0    3    2
## Valiant           18.1   6  225 105 2.76 3.460 20.22  1  0    3    1

Make sure that the columns dose and cyl are converted as factor variables using the R script above.

Simple plots

library(ggplot2)
# Box plot
ggplot(ToothGrowth, aes(x=dose, y=len)) +geom_boxplot()
# scatter plot
ggplot(mtcars, aes(x=wt, y=mpg)) + geom_point()

ggplot2 color, graph, R softwareggplot2 color, graph, R software

Use a single color

# box plot
ggplot(ToothGrowth, aes(x=dose, y=len)) +
  geom_boxplot(fill='#A4A4A4', color="darkred")
# scatter plot
ggplot(mtcars, aes(x=wt, y=mpg)) + 
  geom_point(color='darkblue')

ggplot2 color, graph, R softwareggplot2 color, graph, R software

Change colors by groups

Default colors

The following R code changes the color of the graph by the levels of dose :

# Box plot
bp<-ggplot(ToothGrowth, aes(x=dose, y=len, fill=dose)) +
  geom_boxplot()
bp
# Scatter plot
sp<-ggplot(mtcars, aes(x=wt, y=mpg, color=cyl)) + geom_point()
sp

ggplot2 color, graph, R softwareggplot2 color, graph, R software

The lightness (l) and the chroma (c, intensity of color) of the default (hue) colors can be modified using the functions scale_hue as follow :

# Box plot
bp + scale_fill_hue(l=40, c=35)
# Scatter plot
sp + scale_color_hue(l=40, c=35)

ggplot2 color, graph, R softwareggplot2 color, graph, R software

Note that, the default values for l and c are : l = 65, c = 100.

Change colors manually

A custom color palettes can be specified using the functions :

  • scale_fill_manual() for box plot, bar plot, violin plot, etc
  • scale_color_manual() for lines and points
# Box plot
bp + scale_fill_manual(values=c("#999999", "#E69F00", "#56B4E9"))
# Scatter plot
sp + scale_color_manual(values=c("#999999", "#E69F00", "#56B4E9"))

ggplot2 color, graph, R softwareggplot2 color, graph, R software

Note that, the argument breaks can be used to control the appearance of the legend. This holds true also for the other scale_xx() functions.

# Box plot
bp + scale_fill_manual(breaks = c("2", "1", "0.5"), 
                       values=c("red", "blue", "green"))
# Scatter plot
sp + scale_color_manual(breaks = c("8", "6", "4"),
                        values=c("red", "blue", "green"))

ggplot2 color, graph, R softwareggplot2 color, graph, R software

The built-in color names and a color code chart are described here : color in R.

Use RColorBrewer palettes

The color palettes available in the RColorBrewer package are described here : color in R.

# Box plot
bp + scale_fill_brewer(palette="Dark2")
# Scatter plot
sp + scale_color_brewer(palette="Dark2")

ggplot2 color, graph, R softwareggplot2 color, graph, R software

The available color palettes in the RColorBrewer package are :

RColorBrewer palettes

Use Wes Anderson color palettes

Install and load the color palettes as follow :

# Install
install.packages("wesanderson")
# Load
library(wesanderson)

The available color palettes are :

wesanderson-color palettes

library(wesanderson)
# Box plot
bp+scale_fill_manual(values=wes_palette(n=3, name="GrandBudapest"))
# Scatter plot
sp+scale_color_manual(values=wes_palette(n=3, name="GrandBudapest"))

ggplot2 color, graph, R softwareggplot2 color, graph, R software

Use gray colors

The functions to use are :

  • scale_colour_grey() for points, lines, etc
  • scale_fill_grey() for box plot, bar plot, violin plot, etc
# Box plot
bp + scale_fill_grey() + theme_classic()
# Scatter plot
sp + scale_color_grey() + theme_classic()

ggplot2 color, graph, R softwareggplot2 color, graph, R software

Change the gray value at the low and the high ends of the palette :

# Box plot
bp + scale_fill_grey(start=0.8, end=0.2) + theme_classic()
# Scatter plot
sp + scale_color_grey(start=0.8, end=0.2) + theme_classic()

ggplot2 color, graph, R softwareggplot2 color, graph, R software

Note that, the default value for the arguments start and end are : start = 0.2, end = 0.8

Continuous colors

The graph can be colored according to the values of a continuous variable using the functions :

  • scale_color_gradient(), scale_fill_gradient() for sequential gradients between two colors
  • scale_color_gradient2(), scale_fill_gradient2() for diverging gradients
  • scale_color_gradientn(), scale_fill_gradientn() for gradient between n colors

Gradient colors for scatter plots

The graphs are colored using the qsec continuous variable :

# Color by qsec values
sp2<-ggplot(mtcars, aes(x=wt, y=mpg, color=qsec)) + geom_point()
sp2
# Change the low and high colors
# Sequential color scheme
sp2+scale_color_gradient(low="blue", high="red")
# Diverging color scheme
mid<-mean(mtcars$qsec)
sp2+scale_color_gradient2(midpoint=mid, low="blue", mid="white",
                     high="red", space ="Lab" )

ggplot2 color, graph, R softwareggplot2 color, graph, R softwareggplot2 color, graph, R software

Gradient colors for histogram plots

set.seed(1234)
x <- rnorm(200)
# Histogram
hp<-qplot(x =x, fill=..count.., geom="histogram") 
hp
# Sequential color scheme
hp+scale_fill_gradient(low="blue", high="red")

ggplot2 color, graph, R softwareggplot2 color, graph, R software

Note that, the functions scale_color_continuous() and scale_fill_continuous() can be used also to set gradient colors.

Gradient between n colors

# Scatter plot
# Color points by the mpg variable
sp3<-ggplot(mtcars, aes(x=wt, y=mpg, color=mpg)) + geom_point()
sp3
# Gradient between n colors
sp3+scale_color_gradientn(colours = rainbow(5))

ggplot2 color, graph, R softwareggplot2 color, graph, R software

Infos

This analysis has been performed using R software (ver. 3.1.2) and ggplot2 (ver. 1.0.0)


Enjoyed this article? I’d be very grateful if you’d help it spread by emailing it to a friend, or sharing it on Twitter, Facebook or Linked In.

Show me some love with the like buttons below... Thank you and please don't forget to share and comment below!!
Avez vous aimé cet article? Je vous serais très reconnaissant si vous aidiez à sa diffusion en l'envoyant par courriel à un ami ou en le partageant sur Twitter, Facebook ou Linked In.

Montrez-moi un peu d'amour avec les like ci-dessous ... Merci et n'oubliez pas, s'il vous plaît, de partager et de commenter ci-dessous!





This page has been seen 3118475 times